高交流电电压小交流电试验报告装置仪（耐电弧放电试验报告装置仪）-（折算机抑制）

High voltage low current tester (arc resistance tester) - (computer control)

车辆品牌：耐电弧试验机

Product name: electric arc resistance tester

厂品应用：NDH-A

Product model: NDH - A

实现的标准：GB/T 1411-2002《固态物绝缘电阻用料耐高压得很低交流电焊弧电池充电的测试》（符合IEC  61621-1997）及ASTM D495等标准的的标准要求定制研制的，并完全符合IEC 149、UL 746A等应力测试形式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

首要常用领域及职能：

本做实验的时候机是安装广泛应主要用于电机马达、设备和家里用的设备等行业中的高压电工用朔胶、硅橡胶胶和耐压带电阻带漆等耐压带电阻带材质的耐弧光耐腐蚀性综合评价，主主要用于粉末状耐压带电阻带材质如：朔胶、薄膜和珍珠棉、硅橡胶、矿石、瓷器、安全玻璃、耐压带电阻带油、耐压带电阻带漆、瓦楞纸等媒质的耐弧光耐腐蚀性测评；

本试验报告机由计算公式机操作电脑运行，行彰显某一工作报告操作的情形及工作报告操作耗时，工作报告操作完后并存有某一工作报告操作数据分析，并可打印图片.标准的调查报告范文。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为横竖三合一设备构造，下部分为进行系統，上侧为冲击恒温恒湿试验箱。

2 本车辆分为*新智慧的控制技术性，用使用步骤（IEC或ASTM）可电脑自动完成试验装置，并在平板电脑上上屏幕上显示试验检测时和毕竟。

3 **的性能好，抗侵扰实力强，软件测试要求高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断時间差值：需小于 ±10ms

2 调压器使用量：2kVA

3 额定的现场实验电压降：12.5kV

4 校正端电压精准度：±3%

5 瞬时电流的控制导致精度：±10%  电压电流量测精准度：1.5%

6 探针对试件压力差：（0.5±0.05）N

7 参比电极素材：钨棒

8 电极材料离：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 运用工作环境工作温度：（23±2）℃

10 的使用环镜干湿度：（50±5）%

11 电压：220V±5%  50Hz  10A

12 校正    技术：   国家标准下载/美标/10 mA 反复/20 mA 陆续/30 mA不间断/40 mA联续

13 试验报告流程下述：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 货品尺寸：

NDH-A    耐电弧焊接现场实验仪-微机调节

NDH-B    耐焊弧现场实验仪-触摸式屏调整

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！